Prius L4-1.5L (1NZ-FXE) (Hybrid) (2003)
Camber caster and steering axle inclination:
If the caster and steering axis inclination are not within the specified values, after the camber has been correctly adjusted, recheck the suspension
parts for damaged and/or worn out parts.
4. ADJUST CAMBER
NOTICE: After the camber has been adjusted, inspect the toe-in.
a. Remove the front wheel.
b. Remove the 2 nuts on the lower side of the shock absorber.
If reusing the bolts and/or nuts, coat the threads of nuts with engine oil.
c. Clean the installation surfaces of the shock absorber and the steering knuckle.
d. Temporarily install the 2 nuts.
e. Adjust the camber by pushing or pulling the lower side of the shock absorber in the direction in which the camber adjustment is required.
f.
Tighten the nuts.
Torque: 153 Nm (1,560 kgf-cm, 113 ft. lbs.)
a. Install the front wheel.
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)