Prius L4-1.5L (1NZ-FXE) (Hybrid) (2003)
![background image](/toyota/prius/l4-1.5l_(1nz-fxe)_(hybrid)/Page-313001.png)
Wheel Fastener: Service and Repair
Rear
REPLACEMENT
1. REMOVE REAR WHEEL
2. REMOVE BRAKE DRUM
3. REMOVE HUB BOLT
Using SST, 2 nuts and a screwdriver or an equivalent, remove the hub bolt.
SST 09628-10011
4. INSTALL HUB BOLT
a. Install a washer and nut to a new hub bolt as shown in the illustration.
b. Using a screwdriver or an equivalent to hold, install the hub bolt by torquing the nut.
c. Remove the 3 nuts and washer.
5. INSTALL BRAKE DRUM
6. INSTALL REAR WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)