Prius L4-1.5L (1NZ-FXE) (Hybrid) (2003)
_(hybrid)/Page-696002.png)
NOTE: To prevent deterioration, do not shock the accelerator pedal position sensor.
1. REMOVE ACCELERATOR PEDAL ASSEMBLY
a. Disconnect the accelerator pedal position sensor connector.
b. Remove the 2 bolts and accelerator pedal assembly (w/accelerator pedal position sensor) from the body.
2. INSTALL ACCELERATOR PEDAL ASSEMBLY
a. Install the accelerator pedal assembly with the 2 bolts to the body.
Torque: 16 N.m (163 kgf.cm, 12 ft.lbf)
b. Connect the accelerator pedal position sensor connector.
3. INSPECT SYSTEM OPERATION