Prius L4-1.5L (1NZ-FXE) (Hybrid) (2003)
Air Bag Control Module: Service and Repair
Airbag Sensor Assembly
Replacement Requirements
REPLACEMENT
In the following cases, replace the airbag sensor assembly.
-
If the SRS has been deployed in a collision.
-
If the airbag sensor assembly has been found to be faulty in troubleshooting.
-
If the airbag sensor assembly has been dropped.
CAUTION: Be sure to follow the correct procedure, for removal and installation of the airbag sensor assembly.
Removal and Installation
Airbag Sensor Assembly
REMOVAL
NOTE: Do not open the cover or the case of the ECU and various electrical devices unless absolutely necessary.
(If the IC terminals are touched, the IC may be destroyed by static electricity.)
1. REMOVE LOWER CENTER CLUSTER FINISH PANEL