Prius L4-1.5L (1NZ-FXE) (Hybrid) (2003)
_(hybrid)/Page-108001.png)
Cabin Temperature Sensor / Switch: Service and Repair
INSPECTION
1. REMOVE ROOM TEMPERATURE SENSOR
a. Remove the 2 screws and food lock control lever, then disconnect the connector.
b. Pull the lower instrument finish panel.
c. Disconnect the connector and aspirator hose.
d. Release the 2 claws and remove the sensor.
2. INSPECT ROOM TEMPERATURE SENSOR CIRCUIT
Refer to diagnostic information at Heating and Air Conditioning; Testing and Inspection.
3. INSTALL ROOM TEMPERATURE SENSOR