Prius L4-1.5L (1NZ-FXE) (Hybrid) (2003)
_(hybrid)/Page-1073002.png)
INSTALLATION
1. INSTALL LOWER BALL JOINT
a. Install the lower ball joint and tighten the nut.
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
b. Install a new cotter pin.
If the holes for the cotter pin are not aligned, tighten the nut further up to 60°.
2. INSTALL STEERING KNUCKLE WITH AXLE HUB
3. CHECK ABS SPEED SENSOR SIGNAL
4. CHECK FRONT WHEEL ALIGNMENT