Prius L4-1.5L (1NZ-FXE) (Hybrid) (2003)
Place the dust cover and using a torx socket (T30), install the 3 bolts.
Torque: 8.3 Nm (85 kgf-cm, 74 inch lbs.)
3. INSTALL FRONT AXLE HUB
Using SST and a press, install the axle hub.
SST 09608-32010, 09950-00010 (09951-00550) 09950-70010 (09951-07150)
4. INSTALL LOWER BALL JOINT
a. Install the lower ball joint and tighten the nut.
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
b. Install a new cotter pin.
If the holes for the cotter pin are not aligned, tighten the nut further up to 60°.