Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
(d) Remove the crankshaft pulley bolt.
11. INSTALL CHAIN SUB-ASSEMBLY
(a) Align the mark plate (orange) with the timing mark as shown in the illustration and install the chain.
HINT
*
Be sure to position the mark plate at the front of the engine.
*
The mark plate on the camshaft side is colored orange.
*
Do not pass the chain around the sprocket of the camshaft timing gear. Only place it on the sprocket.
*
Pass the chain through the No. 1 vibration damper.
(b) Hold the hexagonal portion of the camshaft with a wrench and turn the camshaft timing gear counterclockwise to align the mark plate (orange)
and timing mark, and then install the chain.
(c) Hold the hexagonal portion of the camshaft with a wrench and turn the camshaft timing gear clockwise.
HINT
To tension the chain, slowly turn the camshaft timing gear clockwise to prevent the chain from being misaligned.
(d) Align the mark plate (yellow) and timing mark and install the chain to the crankshaft timing gear.