Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
Removal
SUPPLEMENTAL RESTRAINT SYSTEMS: REAR AIRBAG SENSOR: REMOVAL
HINT
*
Use the same procedure for the RH side and LH side.
*
The procedure listed below is for the LH side.
1. PRECAUTION
CAUTION:
Be sure to read Precaution thoroughly before servicing See: Restraint Systems/Air Bag Systems/Service Precautions.
2. REMOVE REAR NO. 2 FLOOR BOARD (for Separate Type) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal
3. REMOVE REAR DECK FLOOR BOX See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
4. REMOVE REAR NO. 3 FLOOR BOARD See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
5. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
6. REMOVE REAR SEAT CUSHION ASSEMBLY See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Removal
7. REMOVE REAR DOOR SCUFF PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal