Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
Wheel Fastener: Service and Repair
Front Axle Hub Bolt
Components
AXLE AND DIFFERENTIAL: FRONT AXLE HUB BOLT: COMPONENTS
Replacement
AXLE AND DIFFERENTIAL: FRONT AXLE HUB BOLT: REPLACEMENT
NOTICE:
When the brake pedal is first depressed after replacing the brake pads or pushing back the disc brake piston, DTC C1214 may be
output. As there is no malfunction, clear the DTC.
HINT
*
Use the same procedure for the RH side and LH side.
*
The procedure listed below is for the LH side.
1. REMOVE FRONT WHEEL
2. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY
(a) Remove the 2 bolts and separate the front disc brake caliper assembly.
NOTICE:
Use wire or an equivalent tool to keep the front disc brake caliper assembly from hanging down by the flexible hose.
3. REMOVE FRONT DISC See: Brakes and Traction Control/Disc Brake System/Service and Repair/Removal and Replacement/Front
Brake/Removal
4. REMOVE FRONT AXLE HUB BOLT
(a) Temporarily install 2 nuts to the front axle hub bolts as shown in the illustration.