Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
_hybrid/Page-3015003.png)
HINT
Matchmarks are not necessary if the windshield glass assembly is not going to be reused.
(f) Disconnect the windshield glass stoppers.
NOTICE:
*
There are No. 1 and No. 2 stoppers on the windshield glass sub-assembly as shown in the illustration. Be careful not to damage the
windshield glass sub-assembly when cutting off the adhesive.
*
To prevent the windshield glass sub-assembly from dropping when performing this operation, be sure to hold the windshield glass
using suction cups.
HINT
Depending on vehicles, 1-piece or 2-piece type stoppers are used.
(g) Using suction cups, remove the windshield glass sub-assembly.
NOTICE:
*
Be careful not to drop the windshield glass sub-assembly.
*
Leave as much adhesive on the vehicle body as possible when removing the windshield glass sub-assembly.
26. REMOVE WINDOW GLASS ADHESIVE DAM
(a) Using a scraper, remove the windshield glass adhesive dam.
NOTICE:
*
Be careful not to damage the windshield glass.
*
Be sure to replace the window glass adhesive dam with a new one.
27. REMOVE WINDSHIELD OUTSIDE MOULDING
(a) Using a scraper, remove the windshield outside moulding.
NOTICE:
