RAV4 2-Door 4WD L4-2.0L (3S-FE) (1997)
Drive Belt: Testing and Inspection
A/C
DRIVE BELT TENSION INSPECTION
1. INSPECT DRIVE BELTS INSTALLATION CONDITION
Check that the drive belt fits properly in the ribbed grooves.
2. INSPECT DRIVE BELT TENSION
Using a belt tension gauge, check the drive belt tension.
Drive belt tension:
New belt: 165 ± 25 lb
Used belt: 110 ± 10 lb
HINT:
-
"New belt" refers to a belt which has been used less than 5 minutes on a running engine.
-
"Used belt" refers to a belt which has used on a running engine for 5 minutes or more.
-
After installing the drive belt, check that it fits properly in the ribbed grooves.