toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Condenser Fan|Page 5975 > < Diagram Information and Instructions|Page 5972
Page 1
background image

Condenser Fan: Testing and Inspection
Condenser Fan

ON-VEHICLE INSPECTION

INSPECT CONDENSER FAN OPERATION 

Inspect the fan operation, as shown below.

Test conditions:
-

Ignition switch ON

-

Blower speed control switch position HI

-

GA/C switch ON 

Condition .................................................................................................................................................................................................  Fan Operation
Engine coolant temperature                
83 °C (181 °F) or below ....................................................................................................................................................................................  Not rotate
Engine coolant temperature                   
98 °C (208 °F) or above ..........................................................................................................................................................................................  Rotate
Refrigerant pressure is less than      
1,520 kPa (15.5 kg/Sq.cm, 220 psi) ..................................................................................................................................................................  Not rotate
Refrigerant pressure is 1,520 kPa
(15.5 kg/cm2, 220 psi)
 or above ..............................................................................................................................................................................  Rotate

If operation is not as specified, proceed next inspection.

Condenser Fan|Page 5975 > < Diagram Information and Instructions|Page 5972