RAV4 2-Door 4WD L4-2.0L (3S-FE) (1997)
^
The camber will change about 16' (0.27°) with each graduation of the cam.
c. Torque the lock bolt.
Torque: 113 Nm (83 ft. lbs.)
6. Adjust toe-in.
a. Measure the distance between each wheel disc and corner of the cam bracket, then confirm that both are the same.
No. 2 lower suspension arm length difference: 1 mm (0.04 inch) or less
If the left-right difference is greater than 1 mm (0.04 inch), adjust it by following the procedures below.
b. Loosen the toe-adjust cam lock bolt.
c. Turn the toe-adjust cam an equal amount to adjust toe-in.
HINT:
^
Try to adjust the toe-in to the center value.
^
The toe-in will change about 2.5 mm (0.10 inch) with each graduation of the cam (both side).
d. Torque the lock bolts.
Torque: 132 Nm (97 ft. lbs.)