RAV4 2-Door 4WD L4-2.0L (3S-FE) (1997)
Power Steering Fluid: Testing and Inspection
Fluid Pressure Check
CHECK
1. Connect Special Service Tool (SST).
a. Disconnect the pressure feed tube.
b. Connect the SST, as shown.
SST 09640 - 10010 (09641 - 01010, 09641 - 01030, 09641 -01060) or equivalents.
NOTICE: Check that the valve of the SST is in the open position.
2. Bleed power steering system.
3. Boost fluid temperature.
a. Start the engine and run it at idle.
b. Turn the steering wheel from lock to lock several times to boost fluid temperature.
Fluid temperature: 80° C (176° F)
4. Check fluid pressure reading with valve closed. With the engine idling, close the valve of the SST and observe the reading on the SST.
Fluid pressure (Minimum): 7,400 kPa (1,067 psi)
NOTICE: