RAV4 2-Door 4WD L4-2.0L (3S-FE) (1997)
5. Remove oil seals.
a. Using SST, remove the inner oil seal.
SST 09308 - 00010
b. Using SST, remove the outer oil seal.
SST 09308 - 00010
6. Remove bearing from steering knuckle.
a. Using snap ring pliers, remove the snap ring.
b. Place the inner race on the outside of the bearing.
c. Using SST and a press, remove the bearing.
SST 09527 - 17011, 09950 - 60010 (09951 - 00540), 09950 - 70010 (09951 - 07150)
ASSEMBLY
1. Install bearing.
a. Using SST and a press, install a new bearing to the steering knuckle.