RAV4 2WD L4-2.4L (2AZ-FE) (2004)
/Page-1204001.png)
Blower Motor Resistor: Testing and Inspection
BLOWER RESISTOR
INSPECTION
1. REMOVE BLOWER RESISTOR
a. Disconnect the blower resistor connector.
b. Remove the 2 screws and blower resistor.
2. INSPECT BLOWER RESISTOR CONTINUITY
If continuity is not as specified, replace the blower resistor.
3. REINSTALL BLOWER RESISTOR
a. Install the blower resistor with the 2 screws.
b. Connect the blower resistor connector.
