RAV4 2WD L4-2.5L (2AR-FE) (2009)
(b) Remove the handle by sliding and pulling it in the direction indicated by the arrow in the illustration.
Installation
DOOR LOCK: ENTRY LOCK AND UNLOCK SWITCH (for Back Door): INSTALLATION
INSTALLATION
1. INSTALL BACK DOOR OUTSIDE HANDLE
(a) Install the handle by pushing and sliding it in the direction indicated by the arrows in the illustration.
(b) Connect the connector.
2. INSTALL BACK DOOR OUTSIDE HANDLE COVER See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Reassembly
3. INSTALL BACK DOOR SERVICE HOLE COVER See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Reassembly
4. INSTALL BACK DOOR TRIM BOARD ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Reassembly
5. INSTALL BACK DOOR COURTESY LIGHT SWITCH ASSEMBLY See: Instrument Panel, Gauges and Warning Indicators/Door
Switch/Service and Repair/Back Door Courtesy Switch/Installation