RAV4 2WD L4-2.5L (2AR-FE) (2009)
Navigation System: Service and Repair
Installation
NAVIGATION: NAVIGATION RECEIVER: INSTALLATION
INSTALLATION
1. INSTALL NO. 2 RADIO BRACKET
(a) Install the radio receiver bracket to the navigation receiver with the 4 screws.
2. INSTALL NO. 1 RADIO BRACKET
(a) Install the radio receiver bracket to the navigation receiver with the 4 screws.
3. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
(a) Attach the 4 claws to install the instrument cluster finish panel.
4. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET
(a) Connect all the connectors to install the navigation receiver.
(b) Insert the navigation receiver to attach the 2 claws and 4 clips on its backside.
(c) Install the 4 bolts.
Torque: 12.8 Nm (130 kgf-cm, 9 ft-lbf)