RAV4 2WD L4-2.5L (2AR-FE) (2009)
(a) Enter the display adjustment screen by pressing the "DISP" switch.
(b) Turn the light control switch to the TAIL position.
(c) Check if "Day Mode" on the display adjustment is ON.
OK:
"Day Mode" is ON.
NG -- CHECK VEHICLE SIGNAL (DISPLAY CHECK MODE)
OK -- TURN "DAY MODE" SETTING OFF
2. CHECK VEHICLE SIGNAL (DISPLAY CHECK MODE)
(a) Enter the "Display Check" mode and select "Vehicle Signal Check" See: Initial Inspection and Diagnostic Overview/Operation Check.
(b) Check that the display changes between ON and OFF according to the light control switch operation.
OK:
HINT: The display is updated once per second. It is normal for the display to lag behind the actual switch operation.
NG -- GO TO "Illumination Circuit"
OK -- REPLACE NAVIGATION RECEIVER ASSEMBLY
Display Panel does not Open, Tilt or Tilts Improperly
NAVIGATION: NAVIGATION SYSTEM: Display Panel does not Open, Tilt or Tilts Improperly
Display Panel does not Open, Tilt or Tilts Improperly
INSPECTION PROCEDURE
PROCEDURE
1. CHECK NAVIGATION RECEIVER ASSEMBLY
(a) Check for foreign matter or obstructions caught in the moving parts of the panel.
OK: