RAV4 2WD L4-2.5L (2AR-FE) (2009)
/Page-2102008.png)
(a) Disconnect the E82 navigation receiver assembly connector.
(b) Disconnect the B26 park/neutral position switch.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
3. INSPECT PARK/NEUTRAL POSITION SWITCH
(a) Disconnect the B26 switch connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Result
