RAV4 2WD L4-2.5L (2AR-FE) (2009)
Standard Resistance:
NOTE: correct removal or installation of the spiral cable may cause airbag deployment.
HINT:
-
Removal See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair/Removal
-
Installation See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair/Installation
NG -- REPLACE SPIRAL CABLE
OK -- Continue to next step.
3. CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - SPIRAL CABLE)
(a) Disconnect the E87 receiver connector.
(b) Disconnect the E7 cable connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE NAVIGATION RECEIVER ASSEMBLY