RAV4 2WD L4-2.5L (2AR-FE) (2009)
Keyless Entry Module: Service and Repair
Installation
DOOR LOCK: DOOR CONTROL RECEIVER: INSTALLATION
INSTALLATION
1. INSTALL DOOR CONTROL RECEIVER
(a) Install the receiver with the bolt.
(b) Connect the receiver connector.
2. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH (w/o Rear No. 2 Seat)
(a) Attach the 7 clips to install the garnish.
3. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH (w/ Rear No. 2 Seat)
(a) Attach the 7 slips to install the garnish.
(b) Connect the rear No. 2 seat belt's shoulder anchor.
(1) Connect the shoulder anchor with the bolt.
Torque: 42 Nm (428 kgf-cm, 31 ft-lbf)
(2) Attach the claws to close the seat belt anchor cover.
4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (w/o Rear No. Seat) See: Interior Moulding / Trim/Headliner/Service and