RAV4 2WD L4-2.5L (2AR-FE) (2009)
Roof Rack Frame: Service and Repair
Installation
EXTERIOR: ROOF RACK: INSTALLATION
INSTALLATION
1. REPLACE ROOF CARRIER SEAL
(a) Remove the seals.
(b) Install new seals as shown in the illustration.
2. INSTALL ROOF RACK LEG FRONT LH
(a) Install the leg cushion front.
(b) Install the roof rack leg front with the 2 screws.
Torque: 2.8 to 5.0 Nm (29 to 51 kgf-cm, 25 to 44 in-lbf)
3. INSTALL ROOF RACK LEG REAR LH
(a) Install the leg cushion rear.
(b) Install the roof rack leg rear with the 2 screws.
Torque: 2.8 to 5.0 Nm (29 to 51 kgf-cm, 25 to 44 in-lbf)
4. INSTALL ROOF RACK ASSEMBLY LH
(a) Install the roof rack with the 4 bolts.
Torque: 38 Nm (387 kgf-cm, 28 ft-lbf)
5. INSTALL ROOF RACK LEG COVER REAR LH
(a) Install the leg cover.
(1) Attach the rib to the bar.
(2) Attach the 4 claws.
6. INSTALL ROOF RACK LEG COVER FRONT LH