RAV4 2WD L4-2.5L (2AR-FE) (2009)
Seat Heater Switch: Service and Repair
Removal
SEAT: SEAT HEATER SWITCH: REMOVAL
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat
belt pretensioner activation.
2. REMOVE SWITCH BASE See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Lower Instrument Panel/Removal
3. REMOVE SEAT HEATER SWITCH
(a) Using a screwdriver, detach the 2 claws and remove the switch.
HINT: Tape the screwdriver tip before use.