RAV4 2WD L4-2.5L (2AR-FE) (2009)
(b) Place tags or marks to identify the installation locations of each brake line.
7. REMOVE BRAKE ACTUATOR WITH BRACKET
(a) Disconnect the brake tube clamp from the bracket.
(b) Remove the 3 nuts and actuator with bracket.
NOTE: Be careful not to damage the brake tubes.
Installation
BRAKE CONTROL: ABS AND TRACTION ACTUATOR: INSTALLATION
INSTALLATION
1. INSTALL BRAKE ACTUATOR WITH BRACKET
NOTE: When installing a new brake actuator, do not remove the hole plug before connecting the brake tube. New actuators are filled with
brake fluid.