RAV4 2WD L4-2.5L (2AR-FE) (2009)
Brake Master Cylinder: Overhaul
Disassembly
BRAKE: BRAKE MASTER CYLINDER: DISASSEMBLY
DISASSEMBLY
NOTICE:
-
The master cylinder and piston are designed so that the piston can easily fall out. Prevent this by making sure that the tip of the master
cylinder points downward when handling the master cylinder.
-
Make sure foreign matter does not adhere to the piston of the master cylinder. If foreign matter adheres, clean it off with a cloth. Then
apply lithium soap base glycol grease to the entire outer circumference of the piston surface that contacts the booster.
1. REMOVE BRAKE MASTER CYLINDER RING PIN
2. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY
3. REMOVE MASTER CYLINDER RESERVOIR GROMMET
4. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY
5. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER
Reassembly
BRAKE: BRAKE MASTER CYLINDER: REASSEMBLY
REASSEMBLY
NOTICE:
-
The master cylinder and piston are designed so that the piston can easily fall out. Prevent this by making sure that the tip of the master
cylinder points downward when handling the master cylinder.
-
Make sure foreign matter does not adhere to the piston of the master cylinder. If foreign matter adheres, clean it off with a cloth. Then
apply lithium soap base glycol grease to the entire outer circumference of the piston surface that contacts the booster.
1. INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER
2. INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY
3. INSTALL MASTER CYLINDER RESERVOIR GROMMET
(a) Apply lithium soap base glycol grease to 2 new grommets, and then install them to the master cylinder.
4. INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY
5. INSTALL BRAKE MASTER CYLINDER RING PIN