RAV4 2WD L4-2.5L (2AR-FE) (2009)
2. INSTALL BRAKE ACTUATOR CASE COLLAR
(a) Install the 4 brake actuator case collars to the brake actuator bolt cushions.
NOTE: Make sure the collars are in full contact with the cushions.
3. INSTALL BRAKE ACTUATOR BRACKET
(a) Install the brake actuator bracket to the brake actuator with the 4 bolts.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
NOTE: Tighten the 4 bolts uniformly in alphabetical order.