RAV4 2WD L4-2.5L (2AR-FE) (2009)
(b) Remove the 2 bolts.
(c) Detach the 2 claws and remove the No. 2 fan shroud.
(d) Remove the cooler condenser from the fan shroud with cooling fan.
HINT: After removing the condenser, make sure that the all 4 cooler condenser cushions are attached to the condenser.
(e) Remove the No. 2 water by-pass hose and No. 2 radiator hose from the radiator.
(f) Remove the No. 1 radiator hose from the radiator.
(g) Remove the 2 bolts and radiator from the fan shroud with cooling fan.
Installation
2AR-FE COOLING: RADIATOR: INSTALLATION