RAV4 2WD L4-2.5L (2AR-FE) (2009)
(a) Install a new gasket onto the front exhaust pipe.
(b) Connect the 3 exhaust pipe supports to install the center exhaust pipe.
(c) Install the 2 bolts.
Torque: 43 Nm (438 kgf-cm, 32 ft-lbf)
3. INSTALL TAILPIPE ASSEMBLY
(a) Using a vernier caliper, measure the free length of the compression spring.
Minimum length:
38.5 mm (1.52 in.)
If the length is less than the minimum, replace the compression spring.
(b) Install a new gasket by hand so that its surface is flush with the center exhaust pipe.
NOTICE:
-
Make sure the gasket is facing the correct direction.
-
Do not reuse the removed gasket.