RAV4 2WD L4-2.5L (2AR-FE) (2009)
Key Cylinder Lamp: Service and Repair
Installation
LIGHTING: IGNITION KEY CYLINDER LIGHT: INSTALLATION
INSTALLATION
1. INSTALL TRANSPONDER KEY AMPLIFIER See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Overhaul/Reassembly
2. INSTALL STEERING COLUMN COVER See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and
Replacement/Installation
3. INSTALL STEERING WHEEL ASSEMBLY See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and
Replacement/Installation
4. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
5. INSPECT STEERING WHEEL CENTER POINT
6. INSTALL STEERING PAD ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Installation
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
8. INSPECT STEERING PAD ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Installation
9. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Installation.