RAV4 2WD L4-2.5L (2AR-FE) (2009)
/Page-2484001.png)
Map Light: Testing and Inspection
LIGHTING: MAP LIGHT ASSEMBLY: INSPECTION
INSPECTION
1. INSPECT MAP LIGHT ASSEMBLY
(a) Connect the battery's positive (+) lead to terminal 6 and the negative (-) lead to terminal 1, and then check that the light comes on when the
switch is in the DOOR position.
OK:
Light comes on.
If the result is not as specified, replace the light assembly.
(b) Connect the battery's positive (+) lead to terminal 6 and the negative (-) lead to terminal 7, and then check that the light comes on when the
switch is in the ON position.
OK:
Light comes on.
If the result is not as specified, replace the light assembly.
