RAV4 2WD L4-2.5L (2AR-FE) (2009)
NG -- CONNECT CONNECTOR
OK -- Continue to next step.
14. CHECK FOR SHORT TO GND IN CAN BUS WIRE (NO. 1 JUNCTION CONNECTOR - ABS AND TRACTION ACTUATOR)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- CONNECT CONNECTOR
OK -- REPAIR OR REPLACE CAN MAIN WIRE OR CONNECTOR (NO. 1 JUNCTION CONNECTOR - NO. 2 JUNCTION
CONNECTOR)
15. CONNECT CONNECTOR
(a) Reconnect the A36 No. 1 junction connector.
NEXT -- Continue to next step.
16. CHECK FOR SHORT TO GND IN CAN BUS WIRE (ECM)
(a) Disconnect the A9 ECM connector.
(b) Measure the resistance of the DLC3.
Standard Resistance: