RAV4 2WD L4-2.5L (2AR-FE) (2009)
/Page-949060.png)
(a) Disconnect the E70 No. 3 junction connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPAIR OR REPLACE CAN MAIN WIRE OR CONNECTOR (NO. 3 JUNCTION CONNECTOR - NO. 2 JUNCTION
CONNECTOR)
OK -- Continue to next step.
17. CHECK FOR OPEN IN CAN BUS MAIN WIRE (NO. 3 JUNCTION CONNECTOR - NO. 4 JUNCTION CONNECTOR)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPAIR OR REPLACE CAN MAIN WIRE OR CONNECTOR (NO. 3 JUNCTION CONNECTOR - NO. 4 JUNCTION
CONNECTOR)
OK -- REPLACE NO. 3 JUNCTION CONNECTOR
