RAV4 2WD L4-2.5L (2AR-FE) (2009)
2. Replace the charcoal canister and charcoal canister filter if any water or debris is noted within the EVAP system.
3. Remove and discard the No. 2 fuel tank protector.
4. Install the fuel tank protector.
Use the following illustrations as reference for parts replacement and installation:
5. Clear DTCs
6. Perform the Automatic EVAP System Check and verify that NO pending DTCs set.
System Select > Engine and ECT > Utility > EVAP System Check
NOTE
If Automatic EVAP System Check fails to run, perform the following:
^
Turn the ignition key OFF.
^
Turn TIS techstream OFF.
^
Turn the ignition key ON and TIS techstream ON and restart Automatic EVAP System Check.