RAV4 2WD L4-2.5L (2AR-FE) (2009)
Engine Control Module: Service and Repair
Removal
2AR-FE ENGINE CONTROL SYSTEM: ECM: REMOVAL
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY
(a) Disconnect the mass air flow meter connector.
(b) Disconnect the purge VSV connector.
(c) Disconnect the 4 wire harness clamps.
(d) Disconnect the 2 purge line hoses.
(e) Disconnect the No. 2 ventilation hose from the air cleaner hose.
(f) Disconnect the purge line hose from the clamp.
(g) Lock the No. 1 air cleaner hose clamp, and then disconnect the No. 1 air cleaner hose from the throttle body.
(h) Detach the 2 hook clamps, and then remove the air cleaner cap.
(i) Remove the air cleaner filter element from the air cleaner case.
3. REMOVE AIR CLEANER CASE