RAV4 2WD L4-2.5L (2AR-FE) (2009)
17. REMOVE TETHER ANCHOR BRACKET SUB-ASSEMBLY (w/o Rear No. 2 Seat)
(a) Remove the bolt and tether anchor bracket.
18. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (w/o Rear No. 2 Seat) See: Body and Frame/Interior Moulding / Trim/Headliner/Service
and Repair/Removal
19. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (w/ Rear No. 2 Seat) See: Body and Frame/Interior Moulding / Trim/Headliner/Service
and Repair/Removal
20. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY RH (w/o Rear No. 2 Seat)
(a) Using a clip remover, detach the 7 clips and remove the garnish.
21. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY RH (w/ Rear No. 2 Seat)
(a) Disconnect the rear No. 2 seat outer belt's shoulder anchor.
(1) Using a screwdriver, detach the 2 claws and open the seat belt anchor cover.
HINT: Tape the screwdriver tip before use.
(2) Remove the bolt and disconnect the shoulder anchor.
(b) Using a clip remover, detach the 7 clips and remove the garnish.