RAV4 2WD L4-2.5L (2AR-FE) (2009)
Tire Pressure Monitor Receiver / Transponder: Service and Repair
Installation
TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER (w/ Antenna): INSTALLATION
INSTALLATION
1. INSTALL TIRE PRESSURE WARNING ANTENNA AND RECEIVER
(a) Install the receiver with the bolt.
Torque: 7.5 Nm (76 kgf-cm, 66 in-lbf)
(b) Connect the connector.
2. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (w/o Rear No. 2 Seat) See: Body and Frame/Interior Moulding / Trim/Headliner/Service
and Repair/Installation
4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (w/ Rear No. 2 Seat) See: Body and Frame/Interior Moulding / Trim/Headliner/Service
and Repair/Installation
5. INSTALL TETHER ANCHOR BRACKET SUB-ASSEMBLY (w/o Rear No. 2 Seat) See: Body and Frame/Interior Moulding /
Trim/Headliner/Service and Repair/Installation
6. INSTALL RECLINING REMOTE CONTROL LEVER BEZEL RH (w/o Rear No. 2 Seat) See: Body and Frame/Seats/Service and Repair/Rear
No. 1 Seat Assembly (for RH Side)/Installation
7. INSTALL REAR DECK TRIM COVER RH (w/ Rear No. 2 Seat) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
8. INSTALL REAR FLOOR FINISH PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
9. INSTALL REAR FLOOR NO. 1 MAT SUPPORT SIDE PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
10. INSTALL REAR FLOOR NO. 2 BOARD
11. INSTALL REAR FLOOR NO. 3 BOARD
12. INSTALL REAR NO. 2 SEAT ASSEMBLY LH (w/ Rear No. 2 Seat) See: Body and Frame/Seats/Service and Repair/Rear No. 2 Seat
Assembly/Installation
13. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (w/ Rear No. 2 Seat) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
14. INSTALL NO. 2 SEAT LEG COVER LH (w/ Rear No. 2 Seat) See: Body and Frame/Seats/Service and Repair/Rear No. 2 Seat
Assembly/Installation
15. INSTALL NO. 2 SEAT LEG COVER RH (w/ Rear No. 2 Seat) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
16. INSTALL NO. 2 SEAT HINGE COVER LH (w/ Rear No. 2 Seat) See: Body and Frame/Seats/Service and Repair/Rear No. 2 Seat
Assembly/Installation
17. INSTALL NO. 2 SEAT HINGE COVER RH (w/ Rear No. 2 Seat) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
18. INSTALL DECK BOARD ASSEMBLY (w/o Rear No. 2 Seat)
19. INSTALL REAR FLOOR NO. 1 BOARD (w/o Rear No. 2 Seat)
20. INSTALL TONNEAU COVER ASSEMBLY (w/o Rear No. 2 Seat)
21. INSTALL PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/o Rear No. 2 Seat)
22. INSTALL REAR DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
23. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
24. REGISTER TRANSMITTER ID See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring System/Testing and
Inspection/Programming and Relearning
25. INSPECT TIRE PRESSURE WARNING SYSTEM