RAV4 2WD L4-2.5L (2AR-FE) (2009)
13. DISCONNECTION OF CONNECTORS FOR FRONT AIRBAG SENSOR
(a) Push down the housing lock (white part) and slide the CPA (yellow part). (At this time, the connector cannot be disconnected.)
(b) Push down the housing lock (white part) again and disconnect the connector.
HINT: Do not push down part A shown in the illustration when disconnecting.
(c) After disconnecting the connector, check that the position of the housing lock (white part) is as shown in the illustration.
14. CONNECTION OF CONNECTORS FOR FRONT AIRBAG SENSOR
(a) Before connecting the connectors, check that the position of the housing lock (white part) is as shown in the illustration.