RAV4 2WD L4-2.5L (2AR-FE) (2009)
Seat Occupant Classification Module - Air Bag: Service and Repair
Removal
SUPPLEMENTAL RESTRAINT SYSTEM: OCCUPANT CLASSIFICATION ECU: REMOVAL
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat
belt pretensioner activation.
2. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat) See: Body and Frame/Seats/Service and Repair/Front Seat Assembly (for Manual
Seat)/Removal
3. REMOVE OCCUPANT CLASSIFICATION ECU
(a) Disconnect the 2 connectors from the occupant classification ECU.
(b) Using a screwdriver, remove the occupant classification ECU.