RAV4 2WD L4-2.5L (2AR-FE) (2009)
(a) Using a screwdriver, detach the 2 claws and open the seat belt anchor cover as shown in the illustration.
HINT: Tape the screwdriver tip before use.
(b) Remove the bolt and disconnect the seat belt's shoulder anchor.
(c) Remove the 2 bolts and seat belt.
27. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY LH (w/ Rear No. 2 Seat) See: Body and Frame/Interior Moulding /
Trim/Headliner/Service and Repair/Removal
28. REMOVE REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH
(a) Remove the bolt and disconnect the seat belt's shoulder anchor.
(b) Remove the 2 bolts and seat belt.
Installation
SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY: INSTALLATION