RAV4 2WD L4-2.5L (2AR-FE) (2009)
Seat Position Sensor: Service and Repair
Removal
SUPPLEMENTAL RESTRAINT SYSTEM: SEAT POSITION SENSOR: REMOVAL
REMOVAL
CAUTION: Be sure to read the precautionary notices concerning the SRS airbag system before servicing it See: Restraint
Systems/Air Bag Systems/Service Precautions.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat
belt pretensioner activation.
2. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat) See: Body and Frame/Seats/Service and Repair/Front Seat Assembly (for Manual
Seat)/Removal
3. REMOVE FRONT SEAT ASSEMBLY (for Power Seat) See: Body and Frame/Seats/Service and Repair/Front Seat Assembly (for Power Seat
Type LH Side)/Removal
4. REMOVE SEAT POSITION AIRBAG SENSOR
(a) Remove the seat slide position sensor protector from the seat position sensor.
(b) Using a T30 "torx" socket, remove the "torx" screw and seat position sensor.
(c) Disconnect the connector.