RAV4 2WD L4-2.5L (2AR-FE) (2009)
(i) Using a screwdriver, stake the nut with the lock washer.
(j) Install the control shaft lever with the washer and nut.
Torque: 13 Nm (133 kgf-cm, 10 ft-lbf)
(k) Connect the shift control cable to the control shaft lever with the nut.
Torque: 15 Nm (153 kgf-cm, 11 ft-lbf)
(l) Connect the switch connector.
2. INSTALL BATTERY
(a) Install the battery bracket reinforcement with the 2 bolts.
Torque: 20 Nm (204 kgf-cm, 15 ft-lbf)
(b) Install the battery carrier with the 4 bolts.
Torque: 20 Nm (204 kgf-cm, 15 ft-lbf)
(c) Install the battery tray.
(d) Install the battery with the battery clamp.
Torque: 17 Nm (168 kgf-cm, 21 in-lbf)for bolt
Torque: 4.9 Nm (50 kgf-cm, 43 in-lbf)for nut
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. ADJUST SHIFT LEVER POSITION
(a) Adjust the shift lever position See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shifter A/T/Adjustments.
5. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a) Inspect the switch See: Testing and Inspection/On-Vehicle Inspection.