RAV4 2WD L4-2.5L (2AR-FE) (2009)
2AR-FE STARTING: IGNITION SWITCH: REMOVAL
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE LOWER STEERING COLUMN COVER
(a) Detach the 4 claws, release the tilt lever and remove the lower steering column cover.
3. REMOVE IGNITION SWITCH ASSEMBLY
(a) Disconnect the ignition switch connector.
(b) Detach the claw and disconnect the key interlock solenoid wire harness connector from the ignition switch connector.
(c) Remove the 2 screws and ignition switch.
Installation
2AR-FE STARTING: IGNITION SWITCH: INSTALLATION
INSTALLATION
1. INSTALL IGNITION SWITCH ASSEMBLY
(a) Install the ignition switch with the 2 screws.