RAV4 2WD L4-2.5L (2AR-FE) (2009)
(b) Install a new moulding as shown in the illustration.
Standard measurement:
3. INSTALL BACK WINDOW MOULDING LOWER
(a) Apply Primer G to the installation part of the window moulding.
NOTICE:
-
Allow the primer to dry for 3 minutes or more.
-
Throw away any leftover primer.
-
Do not apply too much primer.
(b) Install a new moulding as shown in the illustration.
Standard measurement:
4. INSTALL BACK DOOR GLASS
(a) Using a brush or sponge, apply Primer M to the exposed part of the vehicle body.
NOTICE:
-
Allow the primer to dry for 3 minutes or more.
-
Do not apply primer to the adhesive.
-
Throw away any leftover primer.