RAV4 2WD V6-3.5L (2GR-FE) (2006)
/Page-89001.png)
Starter Relay: Testing and Inspection
STARTER RELAY
ON-VEHICLE INSPECTION
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE STARTER RELAY (Marking: ST)
a. Remove the starter relay from the No. 7 relay block.
3. INSPECT STARTER RELAY (Marking: ST)
a. Measure the resistance of the relay.
4. INSTALL STARTER RELAY (Marking: ST)
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
