RAV4 4-Door 4WD L4-2.0L (3S-FE) (1997)
/Page-1909004.png)
3.
Install mudguard using (2) screws at positions G and H as shown in figure 7.
NOTE:
Press the mudguard firmly against the vehicle body to insure proper tit.
4.
Insert third screw at position I as shown in figure 8.
5.
Insert new 4th screw (with washer) at position J as shown in figure 9.
Rear of 4 Door
^
Follow these instructions for both left and right side rear mudguards (for 4 door models).
