RAV4 4-Door 4WD L4-2.0L (3S-FE) (1997)
a. Using SST, remove the snap ring.
SST 07114-84010
ASSEMBLY NOTE: The snap ring should be installed so that its beveled side faces up.
b. Using plastic hammer. tap the rotor off the shaft.
NOTE: Be careful not to damage the pulley when tapping on the rotor.
3. REMOVE STATOR
a. Disconnect the stator lead wires from the compressor housing.
Torque: 3.4 N.m (35 kg.cm, 30 in.lb)
b. Using SST, remove the snap ring and stator.