RAV4 4-Door 4WD L4-2.0L (3S-FE) (1997)
24. Remove No. 2 idler pulley.
25. Remove crankshaft timing pulley.
If the pulley cannot be removed by hand, use SST Puller C Set # 09950-50010 (Hanger 150 # 09951-05010, Slide Arm # 09952-05010, Center
Bolt 100 # 09953-05010, Center Bolt 150 # 09953-05020, Claw No. 1 # 09954-05010 for Type B) or equivalents to remove the timing pulley.
CAUTION: Do not scratch the angle sensor of the timing pulley.
26. Remove oil pump pulley.
Using SST Variable Pin Wrench Set # 09960-10010 (Variable Pin Wrench Arm Assy. # 09962-01000, Pin 6 # 09963-00600) or equivalents,
remove the nut and pulley.