RAV4 4-Door 4WD L4-2.0L (3S-FE) (1997)
![background image](/toyota/rav4_4-door_4wd/l4-2.0l_(3s-fe)/Page-1654011.png)
b. Using a screwdriver, tap out the oil seal.
NOTICE: To prevent rack housing damage, wind vinyl tape on the screwdriver.
c. Coat a new oil seal lip with power steering fluid.
d. Using SST, carefully tap in the oil seal.
SST 09950 - 60010 (09951 - 00230, 09951 - 00330, 09952-06010), 09950-70010 (09951-07150)
NOTICE: Make sure to install the oil seal facing the correct direction.
e. Coat a new bushing with molybdenum disulfide lithium base grease.
f.
Using SST, press in the bushing.
SST 09950 - 60010 (09951 - 00270, 09951 - 00340, 09952-06010), 09950-70010 (09951-07150)
4. If necessary, replace teflon ring and o-ring.
a. Using a screwdriver, remove the teflon ring and O-ring from the steering rack.
NOTICE: Be careful not to damage the groove for the teflon ring.
b. Coat a new O-ring with power steering fluid and install it.